JIS Forged Swing Check Valve, ASTM A105N, DN15, 10K, Flanged

Forged Swing Check Valve

Body material: ASTM A105N
Nominal diameter: DN15 (1/2 Inch)
Nominal class: JIS 10K (Class 125 LB, PN10)
End connection: RF (Flanged)
Metal seat: 13Cr
Face to face: MFR, API 602, JIS
Test and inspection: API 598, JIS
Mode of operation: /

The forged steel check valve relies on the flow of the medium itself to automatically open and close the valve disc. It is used to prevent the reverse flow of medium and is also known as a check valve, one-way valve, reverse flow valve, and back pressure valve. The body guide ensures alignment of the seat and disc. When the piston check valve closes, the flow pressure will force the disc to lift off the seat and allow fluid to pass through the valve.

Forged Steel Swing Check Valve-Features

1. The body is forged steel and available in reduced and full bore design
2. Bolted bonnet, Welded Bonnet or Pressure Seal Bonnet
3. Spring loaded piston
4. Integral seat

Forged Steel Swing Check Valve- Specifications and standards

1. Design standard: API 602, ASME 16.34
2. Pressure temperature standard: ASME 16.34
3. Face to face dimension: MFR Standard
4. Testing and inspection standard: API 598
5. Flanged Ends: ASME B16.5
6. Butt Welded Ends: ASME B16.25
7. Screwed Ends: ASME B1.20.1
8. Socket Welded Ends: ASME B16.11
9. Ends: Flanged ends, Socket Weld End, Screwed End, Butt-weld end
10. Size range: 1/2 Inch - 3 Inch (DN15-DN80)
11. Pressure Range: Class 150 LB, 300 LB, 600 LB, 900 LB, 1500 LB, 2500 LB, 4500 LB
12. Body material: ASTM A105N, ASTM A350 LF2, ASTM A182 F5, ASTM A182 F22, ASTM A182 F304, ASTM A182 F304L, ASTM A182 F316, ASTM A182 F316L, ASTM A182 F347, ASTM A182 F321, ASTM A182 F51, ASTM A182 F55, Inconel Alloy, Monel Alloy, Hastelloy Alloy.
13. Trim material: ASTM A182 F6a, F316, F304, F316L, F321, F51, F55, Inconel, Stellied or Hardfaced